This high-quality brass stock sheet is specifically engineered for lubricating applications. Its inherent properties offer excellent wear resistance and self-lubricating characteristics, ensuring smooth operation and extended component life.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.073" |
| Length | 47" |
| Width | 13" |
Precision-manufactured to tight tolerances, this brass stock sheet boasts a thickness of 0.073 inches, a length of 47 inches, and a width of 13 inches. Composed of a specific brass alloy renowned for its low coefficient of friction and excellent machinability, it is optimized for applications requiring reduced wear and noise. The material's composition facilitates effective lubrication, making it a superior choice for sliding components, bearings, and wear pads in industrial machinery where consistent, low-friction performance is critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut the brass stock sheet to the required dimensions using appropriate metalworking tools. 2. Deburr all edges to ensure a smooth finish and prevent damage to mating parts. 3. Install the cut brass component into its intended application, ensuring proper seating and alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a standard brass alloy not formulated for lubrication. | Ensure the material specification explicitly states it is a lubricating grade brass for optimal performance. |
| Improper edge finishing leading to premature wear. | Thoroughly deburr all cut edges to create a smooth surface that won't abrade mating components. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Low-friction bearing surfaces, Wear plates and guides, Bushings and sleeves.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||