This premium lubricating grade brass stock sheet offers superior wear resistance and low friction. Its precise dimensions and inherent material properties make it ideal for demanding, self-lubricating applications in industrial machinery and custom component fabrication.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.066" |
| Length | 28" |
| Width | 45" |
Precision-manufactured to tight tolerances, this brass stock sheet boasts a material composition optimized for self-lubricating properties. The 0.066" thickness, 28" length, and 45" width ensure consistent performance in applications requiring controlled friction and excellent machinability. Its brass alloy formulation provides inherent corrosion resistance and good thermal conductivity, making it suitable for environments where heat dissipation and durability are critical. This sheet is engineered for applications demanding reliable sliding surfaces and reduced wear on mating components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mating surface thoroughly to remove debris and contaminants. 2. Precisely cut the brass stock sheet to the required dimensions using appropriate tooling. 3. Securely fasten the cut brass component to its intended mounting surface, ensuring proper alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a general-purpose brass alloy instead of a lubricating grade. | Always specify and procure lubricating grade brass stock for applications requiring self-lubricating properties to ensure optimal performance and longevity. |
| Improper cleaning of mating surfaces before installation. | Thoroughly clean both the brass sheet and the mating surface to prevent premature wear and ensure smooth operation. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Wear plates and guides in automated machinery, Bushings and bearings in low-speed, high-load applications, Custom fabricated sliding components and fixtures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||