High-performance nylon stock sheet, 0.065 inches thick, 45 inches long, and 31 inches wide. Ideal for custom fabrication and demanding industrial environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.065" |
| Length | 45" |
| Width | 31" |
Precision-manufactured to tight tolerances, this 0.065" thick nylon stock sheet offers exceptional durability and chemical resistance. Its robust polymer matrix provides excellent abrasion resistance and a low coefficient of friction, making it suitable for sliding components, wear pads, and custom-machined parts. The substantial 45" x 31" dimensions allow for efficient material utilization in large-scale projects. This material is non-conductive and exhibits good impact strength, ensuring reliable performance in various operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark desired dimensions on the nylon stock sheet using a suitable marker. 2. Cut the sheet to size using a band saw, jigsaw, or CNC router with appropriate tooling for plastics. 3. Deburr all edges to ensure a smooth finish and prevent material stress.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to melting or poor edge quality. | Employ sharp, carbide-tipped blades designed for cutting nylon or plastics. Maintain consistent feed rates and consider using coolant if necessary. |
| Over-tightening fasteners, which can cause the nylon to deform or crack. | Use appropriate torque settings or washers to distribute load. Allow for thermal expansion and contraction of the nylon. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom wear pads and guides, Protective sheeting for machinery, Gaskets and seals in chemical environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||