This high-quality carbon steel stock sheet, designated for lubricating applications, offers exceptional durability and precise dimensions. Its specific grade ensures optimal performance in environments requiring controlled friction and wear.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.057" |
| Length | 21" |
| Width | 17" |
Precision-manufactured to tight tolerances, this 0.057-inch thick carbon steel stock sheet measures 21 inches in length and 17 inches in width. Engineered from a low-carbon steel alloy, it exhibits excellent formability and weldability, while its surface is treated to enhance lubricant retention and minimize friction. This material is ideal for fabricating components subjected to sliding wear and requiring consistent lubrication for smooth operation and extended service life.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean surfaces thoroughly to remove any residual oils or contaminants. 2. Ensure proper alignment with mating components for optimal contact. 3. Secure sheet using appropriate fastening methods based on application requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel where a lubricating grade is specified. | Always select the lubricating grade carbon steel for applications requiring reduced friction and enhanced wear resistance. |
| Improper surface preparation before installation. | Thoroughly clean both the sheet and mating surfaces to ensure optimal lubricant distribution and adhesion. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Bearing components, Sliding surfaces, Wear plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||