This brass stock sheet is engineered for demanding lubricating applications. Its specific alloy composition and precise dimensions ensure superior performance in reducing friction and wear, contributing to extended equipment life.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.057" |
| Length | 26" |
| Width | 47" |
Manufactured under strict quality controls, this lubricating-grade brass stock sheet exhibits exceptional wear resistance and a naturally low coefficient of friction. The material's inherent properties, combined with a precise thickness of 0.057 inches, a length of 26 inches, and a width of 47 inches, make it ideal for components requiring self-lubricating characteristics, such as bearings, bushings, and sliding surfaces. Its machinability allows for intricate part fabrication while maintaining its critical lubricating attributes.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. 2. Precisely cut the brass stock sheet to the required dimensions for the component. 3. Securely install the fabricated brass component into its designated application, ensuring proper alignment and fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass alloys in high-friction environments. | Specify lubricating-grade brass for applications requiring reduced wear and friction. |
| Improperly cleaning mating surfaces before installation. | Thoroughly clean all surfaces to prevent premature wear and ensure optimal performance. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearing surfaces, Bushings and sleeves, Wear plates and guides.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||