This 0.054" polycarbonate stock sheet offers exceptional impact resistance and clarity. Its robust construction makes it ideal for protective barriers, glazing, and fabrication in demanding industrial environments.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.054" |
| Length | 42" |
| Width | 45" |
Engineered for reliability and performance, this 0.054" thick polycarbonate sheet boasts superior impact strength, resisting shattering and cracking even under extreme stress. Measuring 42" in width and 45" in length, it provides a substantial surface area for diverse applications. The material exhibits excellent optical clarity, high light transmission, and a wide operating temperature range, ensuring consistent performance in various environmental conditions. Its inherent weatherability and UV resistance further enhance its longevity in outdoor and indoor industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting tool is sharp and appropriate for polycarbonate to prevent chipping. 2. Measure and mark cut lines accurately on the protective film. 3. Securely clamp the sheet to prevent movement during cutting, and use a slow, steady feed rate.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a dull or incorrect saw blade, leading to stress fractures and chipping. | Utilize a fine-toothed, carbide-tipped blade designed for plastics and maintain a consistent, moderate cutting speed. |
| Over-tightening clamps, causing surface stress and potential cracking around the clamping points. | Apply moderate clamping pressure only as needed to stabilize the sheet, distributing pressure evenly. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine Guards, Protective Glazing, Industrial Signage.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||