This 304 stainless steel stock sheet offers exceptional corrosion resistance and durability. Precisely sized at 0.052" thickness, 44" length, and 29" width, it's engineered for demanding safety-related fabrication.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.052" |
| Length | 44" |
| Width | 29" |
Engineered for reliability and performance, this 304 stainless steel stock sheet boasts a nominal thickness of 0.052 inches, ensuring robust structural integrity. Its composition of 18% chromium and 8% nickel provides superior resistance to a wide range of corrosive environments, preventing rust and staining. The sheet measures 44 inches in length and 29 inches in width, offering a substantial surface area for diverse fabrication needs. This material's inherent strength and hygienic properties make it an ideal choice for safety partitions, guards, and protective barriers in industrial and commercial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the surface thoroughly where the sheet will be installed. 2. Measure and precisely cut the sheet to the required dimensions using appropriate metal cutting tools. 3. Secure the sheet using approved fasteners or welding techniques, ensuring all edges are properly finished.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel fasteners which can lead to galvanic corrosion. | Always use 304 or 316 stainless steel fasteners to maintain material integrity. |
| Applying excessive heat during welding, leading to sensitization and reduced corrosion resistance. | Employ proper welding procedures, such as TIG or MIG welding with appropriate filler material, and minimize heat input. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Safety guards and partitions, Protective barriers in high-traffic areas, Food processing equipment components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||