High-performance Nylon stock sheet engineered for robust industrial applications. Offers exceptional strength, wear resistance, and chemical stability for demanding fabrication needs.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.050" |
| Length | 18" |
| Width | 38" |
Designed for demanding industrial environments, this Nylon stock sheet boasts a precise 0.050" thickness, an 18" width, and a 38" length. The material's inherent high tensile strength, excellent abrasion resistance, and good chemical inertness make it ideal for components subjected to continuous wear, impact, and exposure to various lubricants and solvents. Its low coefficient of friction further enhances its suitability for sliding surfaces and wear pads. This sheet can be readily machined, cut, and formed to meet specific application requirements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean and prepare the mounting surface. Ensure it is free from debris and moisture. 2. Accurately cut the Nylon stock sheet to the desired dimensions using appropriate cutting tools. 3. Secure the fabricated Nylon component using suitable fasteners or adhesives, ensuring proper alignment and load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to chipping or melting. | Employ sharp, specialized cutting tools for plastics, such as carbide-tipped blades, and maintain appropriate cutting speeds to prevent heat buildup. |
| Over-tightening fasteners, which can cause stress cracking or deformation of the Nylon sheet. | Use washers and avoid excessive torque when fastening. Allow for slight expansion and contraction of the material due to temperature changes. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Bushings and bearings, Gaskets and seals, Protective covers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||