This industrial-grade brass stock sheet, measuring 0.050 inches thick, 36 inches in length, and 35 inches in width, is engineered for precision sawing and cutting applications.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.050" |
| Length | 36" |
| Width | 35" |
Manufactured under strict quality controls, this brass stock sheet exhibits superior machinability and excellent corrosion resistance, making it suitable for demanding environments. The precise dimensions of 0.050" thickness, 36" length, and 35" width ensure consistent performance in automated cutting processes and intricate fabrication. Its alloy composition is optimized for clean cuts and minimal material waste, facilitating efficient production workflows. This material is ideal for stamping, engraving, and prototyping where tight tolerances are critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is properly supported on a stable cutting surface. 2. Utilize appropriate saw blades designed for non-ferrous metals. 3. Apply steady, controlled pressure during the sawing operation to prevent binding.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull or incorrect saw blades, leading to rough cuts and material damage. | Employ sharp, carbide-tipped blades specifically designed for brass to achieve clean, precise cuts. |
| Applying excessive force, causing the brass to deform or the blade to bind. | Maintain a consistent, moderate feed rate and allow the blade to do the work, avoiding unnecessary pressure. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Precision component fabrication, Electrical connectors and contacts, Decorative metalwork and signage.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||