This high-performance brass stock sheet is engineered for critical lubricating applications. Its inherent material properties reduce friction and wear, ensuring extended equipment life and operational efficiency in demanding industrial environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.050" |
| Length | 43" |
| Width | 29" |
A high-performance industrial component, this brass stock sheet boasts a precise thickness of 0.050 inches, a substantial length of 43 inches, and a generous width of 29 inches. Crafted from brass, it exhibits excellent machinability and a naturally low coefficient of friction, making it ideal for self-lubricating bearings, sliding surfaces, and wear plates. The material's inherent corrosion resistance further enhances its suitability for diverse operational conditions. Its specific alloy composition is optimized for heat dissipation and compatibility with a wide range of lubricants.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mounting surface thoroughly to remove debris. 2. Precisely cut the brass stock sheet to the required dimensions using appropriate tooling. 3. Securely fasten the cut sheet to the intended component using recommended fasteners or adhesives.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during cutting, leading to deformation. | Employ sharp, appropriate cutting tools and apply controlled pressure for clean cuts. |
| Improper surface preparation, resulting in poor adhesion or performance. | Ensure the mounting surface is free of contaminants, oil, and moisture before installation. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bearings, Wear plates and guides, Anti-friction sliding surfaces.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||