This 0.046" polycarbonate stock sheet is engineered for demanding lubricating applications. Its unique material properties offer excellent wear resistance and a low coefficient of friction, ensuring smooth operation and extended component life.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.046" |
| Length | 36" |
| Width | 14" |
Manufactured under strict quality controls, this 0.046" thick polycarbonate stock sheet boasts superior impact resistance and dimensional stability. The inherent low friction of polycarbonate makes it ideal for sliding surfaces and wear components. Its excellent machinability allows for precise custom fabrication. This material exhibits good chemical resistance to a range of lubricants and oils, ensuring performance integrity in challenging industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the substrate thoroughly to remove all contaminants. 2. Cut the polycarbonate sheet to the required dimensions using appropriate cutting tools for plastic. 3. Secure the sheet using mechanical fasteners or a suitable industrial adhesive, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastic, leading to chipping or melting. | Utilize carbide-tipped blades or laser cutting for clean, precise cuts without thermal degradation. |
| Over-tightening fasteners, causing stress concentrations and potential cracking. | Employ washers and allow for thermal expansion by using slightly oversized holes for fasteners. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Low-friction wear strips, Guide rails for automated machinery, Bearing surfaces in conveyor systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||