This premium carbon steel stock sheet, formulated for lubricating applications, offers exceptional lubricity and wear resistance. Its precise dimensions and material composition make it ideal for demanding industrial environments requiring reduced friction.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.042" |
| Length | 21" |
| Width | 12" |
Manufactured under strict quality controls, this 0.042" thick carbon steel stock sheet features a controlled surface finish optimized for lubrication. The material exhibits a moderate carbon content, providing a balance of strength and formability essential for fabricating components that reduce friction and wear. Its dimensions of 21" length and 12" width ensure efficient material utilization in manufacturing processes. This grade is specifically designed to retain lubricants effectively, enhancing performance in sliding mechanisms, bearings, and other high-friction interfaces.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the sheet thoroughly to remove any residual oils or contaminants. 2. Cut the sheet to the required dimensions using appropriate metalworking tools. 3. Apply a suitable lubricant to the prepared surface before installation into the intended application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the sheet without proper surface preparation. | Ensure the sheet is thoroughly cleaned and degreased before use to guarantee optimal lubricant adhesion and performance. |
| Employing standard cutting tools without considering the material's properties. | Utilize sharp, high-quality cutting tools designed for carbon steel to prevent burring and maintain dimensional accuracy. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Sliding wear plates, Low-friction bearing surfaces, Guide rails.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||