This 0.033" thick carbon steel stock sheet offers robust performance for a wide range of industrial safety applications. Its precise dimensions and inherent strength make it an ideal component for fabricated safety barriers, guards, and structural reinforcements.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.033" |
| Length | 34" |
| Width | 33" |
Precision-manufactured to tight tolerances, this carbon steel stock sheet measures 0.033 inches in thickness, 34 inches in length, and 33 inches in width. Composed of high-grade carbon steel, it exhibits excellent tensile strength and formability, suitable for demanding environments. The material's ductility allows for easy fabrication through cutting, bending, and welding, ensuring reliable integration into complex safety systems. Its unpolished finish is characteristic of industrial-grade steel, providing a cost-effective solution where surface finish is not a primary aesthetic concern.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the area is clean and free of debris. 2. Position the carbon steel sheet accurately according to design specifications. 3. Secure the sheet using appropriate fasteners (e.g., bolts, rivets, or welding) based on the application's load requirements and environmental conditions.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect fasteners for the application. | Consult engineering drawings and load capacity requirements to select fasteners with adequate shear and tensile strength, and ensure material compatibility to prevent galvanic corrosion. |
| Inadequate edge preparation before welding. | Properly bevel edges for welding to ensure full penetration and a strong, reliable weld joint. Clean all surfaces to remove rust, mill scale, and contaminants. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Machine guarding, Safety barriers, Industrial enclosures, Protective shields, Structural components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||