This premium brass stock sheet, measuring 0.024 inches thick, 35 inches long, and 19 inches wide, is engineered for superior lubrication performance in demanding industrial environments.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.024" |
| Length | 35" |
| Width | 19" |
Trusted by engineers across multiple sectors, this brass stock sheet offers excellent self-lubricating properties due to its inherent material composition. The precise dimensions of 0.024" thickness, 35" length, and 19" width ensure consistent performance and ease of integration into complex machinery. Brass alloys are chosen for their low friction coefficient and wear resistance, making them ideal for components requiring smooth operation and extended service life. This material also exhibits good thermal conductivity and corrosion resistance, further enhancing its suitability for critical lubricating applications where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the intended mounting surface thoroughly to remove any debris or existing lubricant. 2. Precisely cut the brass stock sheet to the required dimensions for the specific component. 3. Securely fasten the prepared brass sheet to the component using appropriate industrial adhesives or mechanical fasteners, ensuring full contact for optimal lubrication.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using an improperly cleaned surface, leading to poor adhesion and reduced lubrication effectiveness. | Always ensure the mounting surface is meticulously cleaned and free from contaminants before installation. |
| Insufficient or incorrect fastening, resulting in movement and premature wear of the lubricating surface. | Utilize robust fastening methods that guarantee the brass sheet remains firmly in place during operation. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearing surfaces in machinery, Sliding components in automated systems, Wear pads and guides in high-friction areas.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||