Engineered for superior lubrication, this 0.020" brass stock sheet provides low friction and excellent wear resistance. Its precise dimensions and durable brass composition make it ideal for demanding industrial and mechanical components.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.020" |
| Length | 16" |
| Width | 30" |
Specified by design engineers worldwide, this brass stock sheet (0.020" thickness, 16" width, 30" length) is manufactured from high-grade brass alloy known for its inherent lubricity and excellent machinability. The material's low coefficient of friction minimizes wear in sliding applications, while its good thermal conductivity aids in dissipating heat. This makes it a critical component in bushings, bearings, wear pads, and other critical friction-management systems where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate surface is clean and free of debris. 2. Accurately cut the brass sheet to the required dimensions using appropriate tooling. 3. Securely fasten the brass component to the intended mating surface using recommended fasteners or adhesive.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong cutting tool, leading to burrs or deformation. | Employ a sharp, high-speed cutting tool designed for brass to achieve clean cuts and prevent material damage. |
| Improper surface preparation of the mating component. | Thoroughly clean and degrease both the brass sheet and the substrate to ensure optimal adhesion and performance. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bushings, Wear plates and strips, Bearing surfaces, Gears and sprockets in low-load applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||