This premium 0.015-inch thick Nylon stock sheet is engineered for exceptional performance in rigorous industrial environments. Its robust material properties ensure longevity and reliability in diverse applications.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.015" |
| Length | 46" |
| Width | 19" |
Precision-manufactured to tight tolerances, this 0.015" thick Nylon stock sheet offers a nominal length of 46" and a width of 19". Composed of high-grade Nylon, it exhibits superior tensile strength, excellent abrasion resistance, and remarkable chemical inertness to a wide range of solvents and oils. This material is well-suited for applications demanding a balance of flexibility and toughness, ensuring consistent performance under varying operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut sheet to required dimensions using appropriate cutting tools. 2. Prepare surfaces for bonding or assembly if necessary. 3. Secure or install the nylon component according to design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to rough edges and potential delamination. | Employ sharp, specialized plastic cutting blades or routers for clean, precise cuts. |
| Exceeding the recommended operating temperature range, causing material degradation and loss of mechanical properties. | Consult the Nylon material data sheet for precise temperature limitations and ensure the application stays within these parameters. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Gaskets and Seals, Wear Strips and Bushings, Protective Covers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||