This 0.014" thick brass stock sheet, measuring 31" x 23", offers superior formability and excellent corrosion resistance. It's an ideal raw material for intricate fabrication and demanding industrial environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.014" |
| Length | 31" |
| Width | 23" |
Built to exacting engineering tolerances, this brass stock sheet (ASTM B36/B36M or equivalent standard) features a nominal thickness of 0.014 inches, with a length of 31 inches and a width of 23 inches. Composed of a standard brass alloy (e.g., UNS C26000 cartridge brass with approximately 70% copper and 30% zinc), it exhibits excellent ductility, solderability, and machinability, making it suitable for stamping, deep drawing, and intricate component manufacturing in electronics, automotive, and decorative industries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work area is clean and free of debris. 2. Accurately measure and mark the desired cut lines on the brass sheet. 3. Employ appropriate cutting tools (e.g., shears, plasma cutter) suitable for brass of this thickness, maintaining consistent speed and pressure. 4. Deburr all cut edges to prevent injury and ensure smooth assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools leading to burrs or uneven edges. | Utilize high-quality, sharp cutting tools specifically designed for sheet metal fabrication, and always deburr edges after cutting. |
| Improper handling causing scratches or dents on the surface. | Handle the brass sheet with clean gloves and store it on a flat, protected surface to maintain surface integrity. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Precision Stamping, Electrical Connectors, Decorative Trim, Hobbyist Fabrication, Instrument Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||